Results 1 to 3 of 3

Thread: Eev motors

  1. #1
    Join Date
    Jan 2006
    Location
    Australia
    Age
    47
    Posts
    92
    Rep Power
    19

    Eev motors



    I need info on eev motors .their internal structure,windings,wiring,operation,common faults n diagnosis.

    I ve seen mostly have 6 wires comin out ?which points do we test for voltage. I hear sme one cn reverse them wen they closed before commissioning hw do we achieve that ?

    Thnk you.



  2. #2
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: Eev motors

    Where have you looked for this info so far?

    It will save us duplicating information.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  3. #3
    Join Date
    Jan 2006
    Location
    Australia
    Age
    47
    Posts
    92
    Rep Power
    19

    Re: Eev motors

    hi Brian ! I have checked the internet the info that I got isnt clear . Brian u cn answer the followin questions for me :
    1.The arrangement of the windings
    2.Which wires to measure for dc volts
    3.Pulses
    ....and any other useful info

    Get me rite here I have worked on eev and I always carry a workin motor to use to check for power and sometimes coil.
    Last edited by bangoman; 15-07-2009 at 08:36 AM.

Similar Threads

  1. VFD parallel motors
    By SteinarN in forum Technical Speculations
    Replies: 22
    Last Post: 09-03-2008, 10:08 PM
  2. Dayton motors and capacitors
    By Pinpoint in forum Commercial
    Replies: 3
    Last Post: 09-02-2008, 12:40 AM
  3. Electric Motors - Fans - blades
    By MrReds in forum Refrigeration Books
    Replies: 5
    Last Post: 23-11-2006, 07:56 PM
  4. Fasco motors
    By weeksy in forum Electrical
    Replies: 2
    Last Post: 30-06-2006, 07:52 PM
  5. Frozen Evaporator Motors
    By Brian_UK in forum Commercial
    Replies: 15
    Last Post: 03-05-2002, 11:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •