Results 1 to 4 of 4
Thread: Vilter selection
-
14-07-2009, 05:18 PM #1
Vilter selection
I have a couple of 458 XL's and was wondering if anyone can run me a selection for them at two conditions?
I require Tonnage and BHP
Ammonia
1150 RPM
15 PSIG
140 PSIG
15 PSIG
170 PSIG
-
21-07-2009, 09:58 PM #2
Re: Vilter selection
I wish I could help you fullmatty
I do not have the Vilter software any more so I can not give you the exact info you need. Maybe someone on the board here with the Vilter selection program will come along and fill in the blanks I leave.
On my compressor cheat sheet I have the 458XL listed as follows
1200RPM 24psig suction and 167 Discharge
this gives you 398CFM 100.7TR at 130.9 brake horsepower.
I know this does not really help with your direct conditions.
anyone with Vilter software out there do a selection on these compressors?Refrigeration is not just cool, it is my life.
-
22-08-2009, 07:09 AM #3
Re: Vilter selection
roughly one h.p equals one ton of refrigeration,bhp not to sure. I hope this helped.
-
23-08-2009, 07:39 AM #4
Re: Vilter selection
Hi, Goto WWW.vilter.com they have selection software free but i don`t know if its for compressor selection its worth a look. JH lock used to be the distributers I worked for them in calagary in the 70`. I now see its Pace
Good Luck TooshMy wife used to say you never listen to a word I say at least I think that what she said
Similar Threads
-
selection and sizing
By MIT in forum Technical DiscussionsReplies: 2Last Post: 22-06-2009, 11:27 PM -
TX Valve Selection: PHT or TE
By JERRYCOOL in forum IndustrialReplies: 6Last Post: 05-08-2008, 02:10 AM -
Heater info needed Vilter 440VMC
By Sun Dragon in forum CommercialReplies: 1Last Post: 14-01-2007, 08:09 PM -
Vilter 440VMC Block heater info needed
By Sun Dragon in forum Industrial CompressorsReplies: 0Last Post: 14-01-2007, 06:32 PM -
Vilter VMC 350ES
By chemi-cool in forum IndustrialReplies: 5Last Post: 24-08-2005, 01:15 AM