Results 1 to 50 of 896
Thread: AWHP superheat & sub-cooling
Threaded View
-
19-08-2009, 05:26 PM #11
Re: AWHP superheat & sub-cooling
Maybe this will help:
http://www.grainger.com/Grainger/sta..._reseller.html
http://www.grainger.com/Grainger/items/4LZ98
http://www.grainger.com/Grainger/wwg...=27&submit.y=3
Hmmmm... these seem to be limited to 260psi (Tc,sat = 65C), which may not be high enough for our purposes.
On the other hand, modifying it may be as simple as adding a spacer under the spring.
http://www.grainger.com/Grainger/rp_...&iw=713&ih=600
And here a manufacturers tech bulletin:
http://cgproducts.johnsoncontrols.co...PDF/125687.PDF
High pressure valves:
http://cgproducts.johnsoncontrols.co...DF/1900575.PDF
http://cgproducts.johnsoncontrols.co...F/12011514.PDFLast edited by Gary; 19-08-2009 at 08:29 PM.
Similar Threads
-
9 superheat & subcooling scenarios
By nike123 in forum FundamentalsReplies: 39Last Post: 19-07-2011, 03:16 AM -
Superheat and Subcooling
By Chunk in forum FundamentalsReplies: 42Last Post: 15-01-2011, 01:24 AM -
Some information on the aplication of suction gas/liquid line heat exchangers
By SteinarN in forum FundamentalsReplies: 5Last Post: 14-09-2009, 07:33 AM -
Low superheat and sucooling
By jayaeros in forum Trouble ShootingReplies: 23Last Post: 05-07-2009, 06:21 AM -
Compressor loading, cooling, and range of operation.
By Air duster in forum FundamentalsReplies: 10Last Post: 02-04-2008, 08:39 AM