Results 1 to 3 of 3
Thread: Use of Copper Fittings
-
11-07-2009, 10:19 AM #1
Use of Copper Fittings
Hi,
I am working in an Ac Assembling Factory. We developed the copper fittings from our vendor by giving our copper tubing.But he did not care the fittings and kept them in an open atmosphere without any wrapping at least 7-8 months. Now we want to use them but these are very dusty and might be dust travelled inside th piping as well. We are afraid of Complaints from After Market. Kindly advise because Copper is very expensive. Should we use these fittings? If yes, kindly advise the cl;eaning process.
Regards,
Waqas Ahmad
-
11-07-2009, 12:25 PM #2
Re: Use of Copper Fittings
flush with dry nitorgen
-
13-07-2009, 04:33 AM #3
Re: Use of Copper Fittings
Can we use some chemical for cleaning copper fittings like CTC (Carbon Tetra Chloride)
Similar Threads
-
Advice on soldering/brazing thin heat fins to copper tube?
By Tom G in forum FundamentalsReplies: 39Last Post: 04-09-2009, 12:16 AM -
copper theft?
By hillbillywillie in forum Chit Chat & Service StoriesReplies: 6Last Post: 20-01-2009, 07:13 PM -
joining copper to copper, joining copper to brass
By mac_J in forum Technical DiscussionsReplies: 9Last Post: 15-01-2008, 02:29 AM -
Copper tube degreasing specification
By Thermatech in forum Technical DiscussionsReplies: 2Last Post: 23-05-2007, 03:10 PM -
oxidation scale in copper tube and fittings
By DeB in forum FundamentalsReplies: 8Last Post: 23-06-2006, 09:45 PM