Results 1 to 13 of 13
Thread: True Manufacturing
-
30-07-2004, 07:48 PM #1
True Manufacturing
Hi all,
I have a company that is interested in purchasing 10 of the True Manufacturing Model GDM-72F three door freezers for their stores. They are purchaseing them used and they need 11. I am just wondering if anyone has dealt with these units before and could recomend them, or know of any problems that these units might have. I would appreciate any feedback.
Thanks
-
30-07-2004, 11:20 PM #2
Re: True Manufacturing
They are excellent units and you should be satisfied with them. Of course, you can expect to have problems with any used equipment.
-
31-07-2004, 06:18 AM #3
Re: True Manufacturing
Originally Posted by bdobbyn
True units are very popular because they are inexpensive. They are inexpensive because they are not very durable. If you have to replace the drain-line heater, for instance, you will gain an entirely new appreciation for Traulsen or Kelvinator, to name two. You really do get what you pay for.
I would advise a careful inspection before purchase, with particular attention to door frames & door heater connections for signs of deterioration. A used unit is always a risk, especially a cheap, used unit.
Rog
-
29-11-2004, 12:37 PM #4
Re: True Manufacturing
You are talking rubbish my friend, True is the market leader, and has excellent relabilty.
In the UK we have a 3 year parts and labour warranty with 5 year parts and labour on the compressor!
True could not offer this if their products are as unrelaible as you say!Tony
-
29-11-2004, 06:07 PM #5
Re: True Manufacturing
When it comes to bottle coolers, True are tops!!
Any opinions, statements and facts expressed in this message do not constitute legal advice in any shape or form and is given for a general outlook in nature. You are advised to seek appropriate and specific professional assistance from a regulated and authorised advisor for definitive advice.
-
29-11-2004, 10:35 PM #6
Re: True Manufacturing
Originally Posted by nighter1Brian - Newton Abbot, Devon, UK
Retired March 2015
-
30-11-2004, 06:13 AM #7
Re: True Manufacturing
Originally Posted by Tony
Over here they are the industry leader due to low price. The front panels are particularly annoying since they fall apart almost immediately. The evaporator section is also very flimsy and a real pain to take down compared to any other equipment I work on.
Evaporators and condensing units seem to be okay.
Rog
-
30-11-2004, 10:18 PM #8
Re: True Manufacturing
Originally Posted by nighter1
You show your colours real good...........thanks for letting us all know just how smart you are..............we all have opinions and we dont always agree with each other.
But we all have one thing in common.........We respect each other and offer the courtesy to others they deserve........Last edited by Abe; 02-12-2004 at 07:18 AM.
Any opinions, statements and facts expressed in this message do not constitute legal advice in any shape or form and is given for a general outlook in nature. You are advised to seek appropriate and specific professional assistance from a regulated and authorised advisor for definitive advice.
-
06-12-2004, 10:41 AM #9
Re: True Manufacturing
Nighter,
If you don't uses points, commas in your sentences, they are very hard to read.
Don't forget that many of the members of RE - this is something completely different at alt.hvac. - don't speak English as their mother-tongue at that our members are located worldwide. This is the very strong point of this forum. We have Russian, Indian, Israeli, English, Danish, Chinese, New Zealand members and even US members who contribute a lot positive here.
A sentence starts with a capital letter ends wight a point. (.)
Make also more paragraphs.
That's simple basic grammar.
Most of your posts are 1 sentence long.
Forget and leave the tone you used to use in alt.hvac.
You have a posting behavior I don't like that much. In most of your posts, you're laughind with someone, shouting....
Sometimes you do it with members we all respect here and who joined this forum long before you even heard of refrigeration.
You judge peoples without ever seeing them,spoek to them in real life, talked longer to them then we have... That's not fair and proves you're not a gentleman.
This is called net-etiquette or perhaps you can see it as a prove you were well educated by your parents.
And then technically spoken- that's what the intention of this forum was/is - you posted already some real bloopers here.
Go on like that and soon we all will call you Cowboy number 1231.Last edited by Peter_1; 06-12-2004 at 10:44 AM.
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
06-12-2004, 06:12 PM #10
Re: True Manufacturing
Originally Posted by nighter1
Gotcha......................are you crazy or what ??????Any opinions, statements and facts expressed in this message do not constitute legal advice in any shape or form and is given for a general outlook in nature. You are advised to seek appropriate and specific professional assistance from a regulated and authorised advisor for definitive advice.
-
06-12-2004, 06:18 PM #11
Re: True Manufacturing
Originally Posted by nighter1
Altough, I don't gave a clue what you're talking about in your last sentence.
Do you know or understand this: Nighter, je bent het eigenlijk niet waard om op dit forum rond te lopen. Je bent een Amerikaanse nietsnut, een betweter en een moeial. Eigenlijk is het zonde om aan U tijd te verprutsen.It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
06-12-2004, 06:42 PM #12
Re: True Manufacturing
Originally Posted by nighter1
-
07-12-2004, 03:24 AM #13
Re: True Manufacturing
Originally Posted by Peter_1
If the language is incorrectly guessed, add a few more words to the message. I think this is what you said?
Similar Threads
-
compressor manufacturing
By Lc_shi in forum FundamentalsReplies: 9Last Post: 18-03-2010, 07:20 AM -
True Merchandiser
By friesr in forum Technical DiscussionsReplies: 1Last Post: 25-07-2006, 08:08 PM -
New to self employed
By priory in forum Legal-Business-MarketingReplies: 13Last Post: 07-02-2005, 06:26 AM -
True Manufacturing
By bdobbyn in forum Trouble ShootingReplies: 0Last Post: 30-07-2004, 06:57 PM -
True crap
By angryk in forum Trouble ShootingReplies: 10Last Post: 04-12-2003, 10:09 PM