Results 1 to 4 of 4
Thread: Angelo po equipment
-
28-07-2004, 04:14 PM #1
Moderator
Site Moderator : and general nice guy
- Join Date
- Sep 2003
- Location
- ISRAEL
- Age
- 72
- Posts
- 4,248
- Rep Power
- 46
Angelo po equipment
Hi busy guys.
Does anyone have some knowledge/experience with Angelo po equipment??
Chemi
-
28-07-2004, 04:35 PM #2
rbartlett GuestRe: Angelo po equipment
worked on quite a few over the years chemi ;-)
http://www.angelopo.it/Indexgb.htm
cheers
richardLast edited by rbartlett; 28-07-2004 at 04:38 PM.
-
28-07-2004, 05:54 PM #3
Moderator
Site Moderator : and general nice guy
- Join Date
- Sep 2003
- Location
- ISRAEL
- Age
- 72
- Posts
- 4,248
- Rep Power
- 46
Re: Angelo po equipment
Thanks Richard.
I'll get to you later when I get the information about the problems.
Chemi
-
05-09-2011, 09:34 PM #4
VIP Poster
- Join Date
- Jan 2003
- Location
- East Anglia
- Posts
- 1,160
- Rep Power
- 25
Re: Angelo po equipment
Old post i know but just searched Angelo Po as im getting hit with loads of these at the moment. Does anyone have a link as I need controller info especially on blast chillers. Tried phoning Advance technical but they seem to be very busy, looked on the Angelo Po website but appears to need to be registered with them and have a user/password to get into the service section
Similar Threads
-
Repossesing equipment.
By Temprite in forum Air ConditioningReplies: 16Last Post: 08-09-2005, 09:58 PM -
Pressure Equipment Directive
By Andy in forum Technical DiscussionsReplies: 4Last Post: 21-04-2002, 09:12 PM
