wall panel supports - cold stores

[smpsmp45]

Long wall panels which need to be supported from outside, there are many options & designs available. What is the cost effective & simple solution for this?

[gwapa]

Hello smpsmp45

The outside support depend on the many factors

The hight of the walls
The type of panel ,with channels or plane
The thinkes of the panels
The cover sheet of the panel Metal or fiber
It will be located outside or inside
What is the speed velocity of the wind against the walls
Regards
Gwapa

[smpsmp45]

Well it seems you have done a lot of exercise on this. I had referred to various ways offered by companies like ISOCAB. KINGSSPAN ISOPOLI etc. But anyway

The hight of the walls 12.5 Outside / Inside clear 11.62
The type of panel ,with channels or plane - With Corrugations
The thinkes of the panels - 170mm
The cover sheet of the panel Metal or fiber - 0.6mm Precoated sheets
It will be located outside or inside Outside
What is the speed velocity of the wind against the walls No Idea. You can consider Best / Worst Scene for location in Indonesia

[gwapa]

Dear smpsmp45
We are making already a similar one

The worst outer wind is 80 Km/h in our zone close to the coast see . Also it is located in a zone of earthqueak 5 (you should also consider )

We are supporting the panel at 4 m and 8 m hight

We fix the panels to the outer structure (at 4 and 8 m) with an special nylon screw M10

Hope this help
Regards Gwapa

[Peter_1]

Smpsmp, Isocab is a Belgium company situated 35 miles from me.
Are those used in you country?
I have an Isocab manual with all sort of different attachments methods in it for their panels.
Will have a look for you.
It is in Dutch and I got it from an Isocab technician which they use it on site.

[Peter_1]

SmpSmp
I have something but it is too big to post here.
Send me a PM