Results 1 to 4 of 4
Thread: R410a PRV,s
-
29-06-2009, 09:31 AM #1
Registered User
Hey, I am new to : RE
- Join Date
- Oct 2008
- Location
- scotland
- Age
- 57
- Posts
- 8
- Rep Power
- 0
R410a PRV,s
Hello There, just a quick question too you experts out there,Does anyone know what a R410a prv should be set at as i have a chiller job running on the above gas and needs new orv,s fitted with conformity certificates,i was thinking 50 bar whats your views. Regards Malcolm
-
29-06-2009, 03:02 PM #2
VIP Poster
- Join Date
- Feb 2008
- Location
- adelaide sth.oz
- Posts
- 1,015
- Rep Power
- 19
Re: R410a PRV,s
as long as its not rated over burst pressure of the vessels set for this standard what would the problem be
mmm to beer or not to beer...........lets drink breakfast
-
29-06-2009, 11:40 PM #3
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: R410a PRV,s
What does the chiller manufacturer use?
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
30-06-2009, 11:57 AM #4
improving poster
- Join Date
- Sep 2008
- Location
- India
- Age
- 39
- Posts
- 24
- Rep Power
- 0
Re: R410a PRV,s
Dear,
you may know R 410 gas operate at high pressure. so for R410 gas PRV should set at 500 psig(HP side).
Similar Threads
-
Pipes to large for R410a??
By Spanglishsparky in forum Technical SpeculationsReplies: 6Last Post: 09-05-2009, 12:57 AM -
R410A water cooled condenser
By K.R.Iyer in forum FundamentalsReplies: 0Last Post: 04-02-2009, 02:10 AM -
Pressure Testing for R410a
By Pooh in forum Tools and CalculatorsReplies: 33Last Post: 13-08-2008, 11:41 PM -
R410A - state of art
By MrReds in forum RefrigerantsReplies: 2Last Post: 04-03-2007, 10:56 PM -
R410A captube sizing for 2.5 bar / 35 psi pressure drop
By DaBit in forum Technical SpeculationsReplies: 10Last Post: 27-11-2003, 09:05 AM
