Zanussi blast chiller

[glenn1340]

Hi everone,
I hope this warm weather`s keeping you all busy
I`m looking for an operators manual for a Zanussi blast chiller that aquired for a restaurant. Problem is there was no book with it and the ID plate is missing so I can`t identify the model although I do know it`s a 28kg capacity one.
I think it`s a model previous to a BC28A 110718
I`ve tried Zanussi professional but as yet no joy.
Everything works ok but it`s just the control panel and settings I`m not sure about.
Thanks in advance guys.

Regards,
Glenn

[lowcool]

are controller parameter descriptions similar,some manufacturers continue with same board manucfaturers i find lae boards used by different manufacturers of goods

[Peter_1]

And also Carel.
Can't you take a picture of the controller or the PCB?
Carel has a blastchiller controller and so had Eliwell and Dixell. I doubt LAE having this.

[lowcool]

williams the ones manufactured in england imported to australia have lae boards,open one up and have a look,im sure shen feng and other china controller manufacturers have one as well.let alone the rest of italy,the states etc etc etc

[Sasa]

Try to find model and PNC under the logo Zanussi,just pull .
I got all about Zanussi and Electrolux
Best regards
Sasa

[glenn1340]

Try to find model and PNC under the logo Zanussi,just pull .
I got all about Zanussi and Electrolux
Best regards
Sasa

Thanks Sasa, I`ll have a look when I`m there next.
Regards,
Glenn