Results 1 to 12 of 12
  1. #1
    Join Date
    Nov 2008
    Location
    australia
    Posts
    136
    Rep Power
    16

    cps vacuum gauge



    hello, i have a cps vg200 digital vacuum gauge and the readings are up the creek, it will only read properly if not connected to system. once the system is in a vacuum it just takes a lon time to register what micron it is reading. has anyone else seen or heard of this. thanks CT



  2. #2
    Join Date
    Jul 2006
    Location
    New Zealand
    Age
    77
    Posts
    65
    Rep Power
    18

    Re: cps vacuum gauge

    Have you tried washing the sensor in alcohol or similar. May be oil contaminated.

  3. #3
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: cps vacuum gauge

    Are you sure that the vacuum you have created is low enough to register on the gauge?

    Also, as stated above, make sure that the sensor is clean and the battery is good.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  4. #4
    Join Date
    Nov 2008
    Location
    australia
    Posts
    136
    Rep Power
    16

    Re: cps vacuum gauge

    hey guys
    cleaned out with metho pulled vac pump down to 250 microns with dirty vac oil in pump.
    thanks for your help guys

  5. #5
    Join Date
    Nov 2007
    Location
    ENGLAND
    Age
    61
    Posts
    12
    Rep Power
    0

    Re: cps vacuum gauge

    Hi, guys
    Can anyone tell where I can buy pressure gauges, vacuum pump, recovery unit,..etc.. but not too expensive for a tight budget and somewhere here in London.
    Thanks

  6. #6
    Join Date
    Nov 2008
    Location
    australia
    Posts
    136
    Rep Power
    16

    Re: cps vacuum gauge

    local refrigeration dealer, i paid $330 aud for the vac gauge, $460 for a 120l/min vac pump. recovery unit about $900 aud. which is pretty good price for all

  7. #7
    chillifive's Avatar
    chillifive Guest

    Re: cps vacuum gauge

    Quote Originally Posted by sidi View Post
    Hi, guys
    Can anyone tell where I can buy pressure gauges, vacuum pump, recovery unit,..etc.. but not too expensive for a tight budget and somewhere here in London.
    Thanks

    try ebay mate, may even be cheaper from o/seas with ur exchangerate
    shaun

  8. #8
    Join Date
    Aug 2001
    Location
    Gold Coast, Australia
    Posts
    600
    Rep Power
    28

    Re: cps vacuum gauge

    Ah ha, another G.C-er! Welcome to R-E chillifive.

    Sidi, I'd try fleabay. However remember you get what you pay for!

  9. #9
    Join Date
    May 2008
    Location
    Belgium
    Age
    66
    Posts
    802
    Rep Power
    16

    Re: cps vacuum gauge

    in Belgium we have a saying " goedkoop is niet altijd goeiekoop"...so translated it sounds " cheap bying isn't always best bying"

    Ice

  10. #10
    Join Date
    Nov 2008
    Location
    Scotland
    Age
    43
    Posts
    47
    Rep Power
    0

    Re: cps vacuum gauge

    Had the same problem myself, connected up the vac pump and stared pulling a vac, next the gauge stops working. Vac pump had pulled out oil mist from the system and contaminated the sensor. Now i vac systems for an hour befor fitting the guage, no more failures.

    ice/ruuner

  11. #11
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: cps vacuum gauge

    ^ Also, vac guage shouldn't be fitted to vac pump; it should be connected directly to the system if possible.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  12. #12
    Join Date
    Aug 2001
    Location
    Gold Coast, Australia
    Posts
    600
    Rep Power
    28

    Re: cps vacuum gauge

    And also as far on the system from the vac pump connection as you can get.

Similar Threads

  1. Sticky Imperial hp pressure gauge
    By desA in forum Trouble Shooting
    Replies: 12
    Last Post: 21-04-2009, 03:03 PM
  2. Troubleshooting a vacuum pump and gauge set.
    By Old Codger in forum Fundamentals
    Replies: 7
    Last Post: 08-08-2008, 05:13 PM
  3. Evacuation Procedure Electronic Vacuum Gauge
    By Refrigerologist in forum Commissioning
    Replies: 30
    Last Post: 14-04-2008, 12:34 AM
  4. inverters pulling vacuum
    By bangoman in forum Air Conditioning
    Replies: 2
    Last Post: 05-02-2008, 09:12 PM
  5. Vacuum test
    By Peter_1 in forum Fundamentals
    Replies: 15
    Last Post: 13-10-2006, 09:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •