Results 1 to 2 of 2
Thread: IBT heat load
Threaded View
-
12-06-2009, 07:30 AM #1
IBT heat load
Can anyone help me to calculate the total heat load / hour of an ice bank tank working on direct feed of ammonia. Total length of ammonia coil is 1800 m & dia is 32 mm. Temp. inside tube i.e. ammonia is around -7 deg C and outside temp i.e. water is around 0 deg C. Chilled water pumps are 2 nos. of capacity 80,000 LPH.
Similar Threads
-
Some information on the aplication of suction gas/liquid line heat exchangers
By SteinarN in forum FundamentalsReplies: 5Last Post: 14-09-2009, 07:33 AM -
Sensible Heat Factor / capacity of Inverter split Systems at part load?
By Greengrocer in forum Technical SpeculationsReplies: 31Last Post: 09-02-2009, 04:57 PM -
Heat transfer coefficient - Coolpack
By Graham in forum FundamentalsReplies: 10Last Post: 28-05-2008, 01:08 AM -
Compressor loading, cooling, and range of operation.
By Air duster in forum FundamentalsReplies: 10Last Post: 02-04-2008, 08:39 AM -
frostles heat pump
By Lc_shi in forum New TechnologiesReplies: 27Last Post: 31-03-2008, 07:53 AM