Results 1 to 2 of 2
Thread: Sabroe smc 108
-
11-06-2009, 08:16 PM #1
Sabroe smc 108
Hi guys i,m thinking of converting a smc mk3 pack from r22` to r404a and its a heat recovery unit as well. the info i need is are the normal gaskets and orings compatiable and would the condensor need upgrading, at moment its evaporating at -20c and discharge temp is around 90c, any help would be grateful
-
12-06-2009, 02:22 AM #2
Re: Sabroe smc 108
I would not even concider going there with an open drive and 404A, but I stand to be corrected from all the experts.
magoo
Similar Threads
-
Sabroe SMC 16-100 Help me please
By luissandoval in forum NH3Replies: 8Last Post: 10-11-2010, 09:18 PM -
Sabroe Co2 compressor
By Sturt in forum Old Refrigeration PhotosReplies: 5Last Post: 19-02-2010, 03:29 PM -
Two stage Sabroe
By Ian B in forum Industrial CompressorsReplies: 3Last Post: 26-06-2008, 07:16 PM -
Vibration Dampers on Sabroe Compressors
By kelvin_27_84 in forum Industrial CompressorsReplies: 2Last Post: 11-05-2008, 05:55 PM -
Sabroe SMC100 Cylinder Liners
By RANGER1 in forum NH3Replies: 3Last Post: 05-05-2008, 12:20 AM