Results 1 to 50 of 53
Thread: 4-stage cascade
Hybrid View
-
13-12-2009, 05:44 PM #1
Re: 4-stage cascade
Both questions are pretty difficult to answer cause it'll depend on the number of stage(s) running at once, and how high the CPU is overclocked.
Tuning has started.
- 1st stage = HSP @ ~ 10bars & TEV @ -67C
- 2nd stage = HSP @ ~ 10.5bars & modded TEV (R1150) @ -111C
- 3rd stage = HSP @ ~ 7bars & CPEV (wide open) @ -112C
Just for fun. 1st stage is way too cold this way. Anyway, I'm very surprised how well it actually holds to load of the running lower stages even with such a pressure.
With the CPEV opened like this, the 3rd stage pulls down amazingly fast!!
Similar Threads
-
r-23 low stage, cascade system
By johnny1 in forum RefrigerantsReplies: 8Last Post: 21-11-2009, 09:01 PM -
Building a 3 stage cascade
By NoL in forum CPU OverclockersReplies: 9Last Post: 27-03-2009, 08:42 PM -
3-stage cascade
By before in forum CPU OverclockersReplies: 47Last Post: 22-02-2009, 11:18 AM -
Single stage Vs 2 stage comp rack
By Kevin Yeo in forum Supermarket RefrigerationReplies: 0Last Post: 01-02-2007, 03:05 PM -
Regulation regarding hydrocarbons in an cascade
By DaBit in forum FundamentalsReplies: 4Last Post: 19-01-2004, 12:42 PM