Results 1 to 2 of 2
Thread: Cool and dehumidify process air
-
18-05-2009, 11:42 PM #1
Cool and dehumidify process air
To RE:
I am looking for an equipment vendor.
I need to cool and dehumidify 20,000 CFM of process air.
The air comes in at 65 deg F at 85% moisture.
The air needs to exit at 45 deg F at 45% moisture.
This is recirculated process air.
Thanks,
Garner
-
19-05-2009, 01:01 PM #2
Re: Cool and dehumidify process air
Try talking to a munters representative, you will need a desiccant to get a dewpoint that low
Take the V out of HVAC and you are left with a HAC job