Results 1 to 3 of 3
Thread: Sabroe smc 106-s
-
10-05-2009, 04:09 PM #1
Sabroe smc 106-s
Hi guys:
I Have a Sabroe compressor SMC 106-S and I need the electrical diagram, on the side there is a KP98, a differential oil presostat, a KP15A and two KP1.
The motor starter is a star-delta.
Thanks in advance.
Hernan
-
10-05-2009, 06:13 PM #2
Re: Sabroe smc 106-s
Hello Hernan.
I must admit I am confused by your post.
You are asking for a wiring diagram for a HP thermal cut out,
High and low pressure cut outs and a couple of pressure switches.
As all these are just a form of switch and you list yourself as a Electrical Engineer.
I am confused as to why you need our help?
Grizzly
PS any of the mentioned Danfoss switches have their data sheets freely
available via Google or Danfoss website!
-
11-05-2009, 01:41 AM #3
Re: Sabroe smc 106-s
From memory, you have an oil differential protection switch, a low pressure protection switch, a high pressure switch, and a compressor sump temperature control switch.
magoo
Similar Threads
-
Two stage Sabroe
By Ian B in forum Industrial CompressorsReplies: 3Last Post: 26-06-2008, 07:16 PM -
Sabroe Smc 106 S
By DSK in forum Industrial CompressorsReplies: 4Last Post: 22-04-2007, 11:28 PM -
sabroe
By tickles in forum Industrial CompressorsReplies: 1Last Post: 15-04-2007, 06:44 AM -
sabroe water chiller
By dill in forum Air ConditioningReplies: 0Last Post: 17-12-2006, 07:26 PM -
Sabroe oil filters..grumble, grumble, grumble...
By SteveDixey in forum Industrial CompressorsReplies: 3Last Post: 25-12-2005, 07:49 PM