Sourcing a modern equivalent to old USA Copeland compressor

[weeksy]

Greeating folks,

Any ideas on where I can get details on a modern equivalent for an old USA Copeland R22 compressor.

Old model is REY3-1075-PFV.

So far I've drawn a blank from Copeland Belgium, Climate Centre and Emerson/Copeland USA.

Anyone know a UK supplier than can help me out?

Cheers All,

weeksy.

[D.D.KORANNE]

I can help you . What is the displacement of the present compressor in meter cube per hour / CFM . What is the evaporation temp & condensing temp ?
operating voltage & frequency
contact me : ddk0123@gmail.com

[NoNickName]

It's a 17100 btu/hr (5kW capacity) compressor (with R22 at HBP conditions), single phase 220/1 with split capacitor start (330Volts 72-86 mF). The direct replacement shall be RR17K1-PFV. Disclaimer applies.

[Peter_1]

Boink, NoNickName gave you all you needed I suppose.

[weeksy]

Well, I've found the p/n on a cross reference sheet and it matches the data Nonickname provided.

Now, who in the UK can supply me one of these?

Cheers,
Weeksy.

[NoNickName]

Copeland. Who else?

[powell]

Greeating folks,

Any ideas on where I can get details on a modern equivalent for an old USA Copeland R22 compressor.

Old model is REY3-1075-PFV.

weeksy.

weeksy,

The new number for the REY3-0175-PFV is:

RR17K1-PFV-900
sweat connections

or

RR17K1-PFV-959
rotalock suction/ sweat discharge
includes Cap and relay assembly

[weeksy]

Cheers for the extra info Powell.

Right....Anyone have any USEFUL Copeland supplier details for the UK other than Clim*te C*ntre

I'm going round in circles here......