Results 1 to 8 of 8
-
06-05-2009, 09:45 AM #1
Sourcing a modern equivalent to old USA Copeland compressor
Greeating folks,
Any ideas on where I can get details on a modern equivalent for an old USA Copeland R22 compressor.
Old model is REY3-1075-PFV.
So far I've drawn a blank from Copeland Belgium, Climate Centre and Emerson/Copeland USA.
Anyone know a UK supplier than can help me out?
Cheers All,
weeksy.
-
06-05-2009, 09:56 AM #2
Re: Sourcing a modern equivalent to old USA Copeland compressor
I can help you . What is the displacement of the present compressor in meter cube per hour / CFM . What is the evaporation temp & condensing temp ?
operating voltage & frequency
contact me : ddk0123@gmail.com
-
06-05-2009, 01:08 PM #3
Re: Sourcing a modern equivalent to old USA Copeland compressor
It's a 17100 btu/hr (5kW capacity) compressor (with R22 at HBP conditions), single phase 220/1 with split capacitor start (330Volts 72-86 mF). The direct replacement shall be RR17K1-PFV. Disclaimer applies.
Last edited by NoNickName; 06-05-2009 at 01:11 PM.
-
07-05-2009, 07:27 AM #4
Re: Sourcing a modern equivalent to old USA Copeland compressor
Boink, NoNickName gave you all you needed I suppose.
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
08-05-2009, 09:51 AM #5
Re: Sourcing a modern equivalent to old USA Copeland compressor
Well, I've found the p/n on a cross reference sheet and it matches the data Nonickname provided.
Now, who in the UK can supply me one of these?
Cheers,
Weeksy.
-
08-05-2009, 12:29 PM #6
Re: Sourcing a modern equivalent to old USA Copeland compressor
Copeland. Who else?
-
08-05-2009, 06:05 PM #7
-
15-05-2009, 03:46 PM #8
Re: Sourcing a modern equivalent to old USA Copeland compressor
Cheers for the extra info Powell.
Right....Anyone have any USEFUL Copeland supplier details for the UK other than Clim*te C*ntre
I'm going round in circles here......