Results 1 to 6 of 6
-
05-05-2009, 10:14 AM #1
Gasket for s & t sea water condenser
I wish to have correct specifications for gasket material for sea water cooled condenser (shell & tube type)
d.d.koranne
-
05-05-2009, 10:36 AM #2
Re: Gasket for s & t sea water condenser
Metallic or non metallic?
Gasket for water-side or gas-side?
-
06-05-2009, 10:01 AM #3
Re: Gasket for s & t sea water condenser
water side & non-metallic gasket specs .
-
06-05-2009, 12:15 PM #4
Re: Gasket for s & t sea water condenser
Heat transfer equipment design.
by R. K. Shah, Eleswarapu Chinna Subbarao, R. A ...
Considering the corrosive nature of sea water and the necessity to maintain the ... The plates are sealed at the periphery by Nit rile rubber gaskets. ...
-
06-05-2009, 12:57 PM #5
Re: Gasket for s & t sea water condenser
SMPSMP45 is referring to PHE, I assume. I don't think nitrile rubber is an option for sea water s&t condensers. Norwegian oil and gas consortium recommends Neoprene, Butyl rubber or fluoroelastomers.
Nitrile rubber and EPDM, along with others (graphite, PTFE, aramid, carbon fiber) don't seem to be appropriate.
As for metal gaskets, high alloy stainless steel flanges have better results with Alloy 625, 276 or 59 gaskets or titanium gaskets.
Other alloys like 316SS or 317L or 904L shall not be used with high alloy SS flanges.
-
07-05-2009, 11:17 AM #6
Re: Gasket for s & t sea water condenser
Thanks for the reply to all
Similar Threads
-
R410A water cooled condenser
By K.R.Iyer in forum FundamentalsReplies: 0Last Post: 04-02-2009, 02:10 AM -
Condenser water causing corrosion
By 750 Valve in forum Technical DiscussionsReplies: 7Last Post: 28-05-2008, 10:21 AM -
condenser cooling water flow
By claude11 in forum System OptimizationReplies: 2Last Post: 07-09-2007, 06:07 AM -
Making a simple water cooled condenser
By The MG Pony in forum FundamentalsReplies: 19Last Post: 01-08-2007, 11:02 AM -
Building a wine cabinet
By Rory in forum Technical DiscussionsReplies: 38Last Post: 13-07-2004, 08:28 PM