Results 1 to 7 of 7
Thread: Install Danfoss TEV
Threaded View
-
17-04-2009, 05:44 PM #1
Install Danfoss TEV
hi guys just a quickie, i have a danfoss TEV to install in a couple of weeks and the connections are bi-metal, stainless steel outer and copper internal, my question is should i use 40% silver solder/flux to make my conection or should i "braze" it with standard 2% silver (at least 2% is our standard?
i checked on there web site but it just says solder connection not too sure what they mean by this. any help is much appreciated, thank you.
ow also while im on the subject, is it normal to lag the external equalization line if the TEV requires it, as this will be as low 1 - 5*c on this install? (R410A Comfort Cooling Air con)
cheers guys.Last edited by SkyWalker; 17-04-2009 at 05:46 PM.
Similar Threads
-
Too dependent on Danfoss Valves
By kelvin_27_84 in forum IndustrialReplies: 8Last Post: 24-01-2009, 08:33 PM -
York ycaj Danfoss EKS65 phtq info
By tomireland in forum Trouble ShootingReplies: 13Last Post: 22-12-2008, 06:47 PM -
Problems Danfoss Safetyvalve
By Bart Nabbe in forum NH3Replies: 7Last Post: 26-06-2008, 09:05 PM -
Daikin VRVIII Install - Sub Contract
By gwilliamson in forum Air ConditioningReplies: 7Last Post: 07-02-2008, 09:00 PM -
DANFOSS / DEAN and WOOD
By Grizzly in forum Legal-Business-MarketingReplies: 1Last Post: 08-12-2007, 07:29 PM