Results 1 to 3 of 3
Thread: hall v92
-
24-04-2009, 08:47 PM #1
hall v92
hello guys does any body have any torque settings for a v92 ht compressor ,if so could it be possibile to have a list,because the customer wants a full details of rebuild,thank you in advance
-
27-04-2009, 12:59 AM #2
Re: hall v92
Hi GHAZ
PM me with your email address and I will send you the Wear Limits and the Tightening Torques for the V92 range.
Paul
-
Re: hall v92
Don't give your customer a rebuild manual!
tell him that "You have to be a qualified engineer to do work on this kind of system, and by giving him this kind of information, not only would you be putting the customer at risk of damaging his compressor beyond repair, you would also be breaking the law and putting yourself at risk for suits against you from him, since you gave him the illusion that he could fix this himself"
this is so you can sell the overhaul of the compressor to him so you can do it yourself
if he insists on having the manual, tell him that the manual comes with a set of spare parts complete for a major overhaul.
also, having his own untrained personnel work on the compressor would void any insurance he has against breakdowns causing extra costs.
all the above is true-Cheers-
Tycho
Similar Threads
-
J&E Hall - Titanic
By Sturt in forum Old Refrigeration PhotosReplies: 4Last Post: 03-01-2009, 12:02 AM -
J&E Hall Mcquay
By TECH REF in forum Industrial CompressorsReplies: 4Last Post: 05-11-2008, 09:09 AM -
Recommendations for Village Hall
By Greg Spencer in forum Heat PumpsReplies: 14Last Post: 24-02-2008, 02:04 PM -
J E Hall semi- hermetic HSM screw
By blake in forum CommercialReplies: 3Last Post: 08-05-2007, 08:04 PM -
Aircon strategy for a school hall with short lease?
By mamborambo in forum Air ConditioningReplies: 13Last Post: 25-02-2006, 08:47 AM