Results 1 to 6 of 6
Thread: Herl Valves
-
21-04-2009, 07:20 PM #1
Herl Valves
I have a job to repair / replace some Herl shut off valves, however the ones that need attention are at least 15 years old. Does any one know where I can find replacment valve heads or am I gonna have to cut and weld replacements. It would make the job easier to repair the existing valves but either way your help would be apprieciated
-
21-04-2009, 08:40 PM #2
Re: Herl Valves
Hi Quality, I think Parker do Herl valves
http://www.parker.com/portal/site/PA...nguage=default
NormLast edited by Toosh; 21-04-2009 at 08:52 PM. Reason: addition
My wife used to say you never listen to a word I say at least I think that what she said
-
21-04-2009, 09:20 PM #3
Re: Herl Valves
Hi Quality!
Last time I needed any Herl valves and spares. I got them from Gowing Tech Services Northamptonshire.
01933 350350.
At the time I used them they were the u.k. agents for Herl.
But that was at least 5/6 yrs ago so as Toosh suggests things may of changed.
They are a good valve which lends itself to being referbe'd.
So good Luck.
Grizzly
-
22-04-2009, 06:33 AM #4
Re: Herl Valves
Cheers guys I do some diggin today
-
17-08-2009, 09:39 AM #5
Re: Herl Valves
One of the Parker Herl distributors in UK is:
Thermofrost Cryo in Birmingham
Robert Fawkes House, Rea Street South
B5 6LB Birminham
-
02-09-2009, 03:37 PM #6
Similar Threads
-
Too dependent on Danfoss Valves
By kelvin_27_84 in forum IndustrialReplies: 8Last Post: 24-01-2009, 08:33 PM -
Stainless steel valves
By Tycho in forum NH3Replies: 5Last Post: 05-11-2008, 02:16 PM -
Herl valves
By BESC5240 in forum IndustrialReplies: 8Last Post: 10-06-2008, 08:57 PM -
Hinari and how far to open valves
By stryker in forum Air ConditioningReplies: 6Last Post: 14-04-2008, 01:47 AM -
dan foss tx valves
By fuzzy in forum Trouble ShootingReplies: 7Last Post: 02-10-2007, 01:11 PM