Results 1 to 6 of 6
Thread: Hotpoint FF187EG
-
12-04-2009, 04:39 AM #1
Hotpoint FF187EG
Hi everyone new to site, need help on hotpoint FF187EG switched power on, power going to circuit board, nothing working, checked compressor fine, checked capacitor, fine, checked thermister/thermostat, they are ok, checked klixon, this is fine, board doesnt smell or look burnt, looks fine.
No LED to show unit is on, do anybody know what is going on
Thanks
Duggied
-
12-04-2009, 04:51 AM #2
Re: Hotpoint FF187EG
There is a possibilty that the unit is under defrost mode, Hence let the unit run for 1 hr and then check that the unit runs normally.
Thanks
Amit
-
13-04-2009, 03:41 AM #3
Re: Hotpoint FF187EG
thanks amit i will try this
-
16-04-2009, 08:04 AM #4
Re: Hotpoint FF187EG
Hi, Tried this and it did not work, do you have any other suggestions. Thanks
-
16-04-2009, 08:43 AM #5
Re: Hotpoint FF187EG
Dear Check for the fuse on the board if it is gone then nothing will work. As you are confirming rest all part are working OK, then check
1. Main power supply board
2. Fuse on the PCB card
thanks
amit
-
17-04-2009, 07:57 PM #6
Re: Hotpoint FF187EG
hi
there is 3 sensor in ur fridge one for cabihet second for freezer third forthe defrost termination attached to the pipe in freezer comartiment i suspect the last option
Similar Threads
-
Hotpoint FF200E Fridge Freezer Fault
By fredalfred in forum DomesticReplies: 107Last Post: 29-12-2012, 01:26 PM -
Hotpoint fridge not cold anymore.
By tishybabe in forum DomesticReplies: 15Last Post: 01-10-2011, 03:24 PM -
Hotpoint Fridge-Freezer Model FFA84X & FFA97G
By eahmed in forum DomesticReplies: 1Last Post: 22-06-2008, 09:00 AM -
Hotpoint Mistral Plus
By Bobby Ewing in forum DomesticReplies: 5Last Post: 05-01-2008, 11:35 AM -
Hotpoint Mistral Plus playing up. HELP! please
By AJ52TOY in forum DomesticReplies: 6Last Post: 04-05-2007, 09:35 PM