Results 1 to 3 of 3
Thread: Thermo King MD-II Max unit
-
05-04-2009, 07:34 PM #1
Thermo King MD-II Max unit
I just bought this reefer unit, seperate off the truck to use as a walk in cooler. Changed oil and fuel filter, put additive. Unit starts for a few seconds then kills. Gives me a 4 error and motor is spitting out water droplets and black carbon through muffler. He said it hadn't run in 1 1/2 years, but was working when they took it off the truck. Thanks for anything I could try to get it running. It says the 4 code is the discharge air sensor, don't know it should keep it from running. Have no manuel for it. Appreciate any response, Thanks, Dwayne
-
17-05-2009, 01:48 AM #2
Re: Thermo King MD-II Max unit
if your still having problems i can send you some info that should help you out
-
23-05-2010, 06:55 AM #3
Re: Thermo King MD-II Max unit
what is that codes exactly?
Similar Threads
-
MICROPROCESSOR DIAGNOSTICS/Differnces beteween TK/CTC
By REEFER-TEK in forum TransportReplies: 12Last Post: 27-03-2011, 04:12 AM -
thermo king tesco unit fault door code
By cadwaladr in forum TransportReplies: 4Last Post: 03-04-2009, 04:01 PM -
mid-size refrigerated truck Thermo King unit question
By coldkeeper1 in forum TransportReplies: 11Last Post: 11-05-2008, 09:42 PM -
Thermo King OptiSet
By REEFER-TEK in forum TransportReplies: 4Last Post: 06-12-2007, 07:23 PM -
TK basic micro-p features and functions
By REEFER-TEK in forum TransportReplies: 0Last Post: 05-12-2007, 06:25 PM