Results 1 to 4 of 4
Thread: Mcquay compressor
-
03-04-2009, 03:36 PM #1
Mcquay compressor
Hi, Ineed the specification for amcquay compressor .
mqc 908s
pw=140L
vol. stroke=437cmsq/hr
volt 400
FLA=235A
LRA=747
& I asked before about the winding wire type with conection part winding. please I need help
-
03-04-2009, 09:56 PM #2
Re: Mcquay compressor
Hello jebar thats a 190hp ,50/50 part wind,4 pole with kriwan thermisters 120c cut out and 70c cut in you can use int69 control module as motor protector,are you rewinding it your self or a professional because you need to count the turns and groups of coils and measure the wire size,because you can get 2 different wire sizes in a coil and measure the projection of the winding,so it doesnt stick out the body or hit the back of the crankcase,from the lead end lift up the cable and see what connection it has because depending where it was produced ,it could have about 2 different connections eg series 4 pole part wind,2// part wind,
-
08-04-2009, 03:47 PM #3
Re: Mcquay compressor
,you need to get the spec b4 u f#ck with these little mquay baby's
-
08-04-2009, 06:25 PM #4
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Similar Threads
-
mcquay centrifugal chiller 063 compressor
By maico in forum Trouble ShootingReplies: 4Last Post: 22-11-2010, 06:40 PM -
LG heat pump problem
By back2space in forum Heat PumpsReplies: 132Last Post: 01-02-2009, 11:23 PM -
compressor / electrical problem
By Northdude in forum CommercialReplies: 6Last Post: 17-01-2009, 10:24 AM -
SL/SB-400 Pump Down Procedures
By absolute-zero in forum TransportReplies: 1Last Post: 29-01-2008, 09:27 PM -
Compressor pumping efficiency
By shogun7 in forum FundamentalsReplies: 0Last Post: 25-02-2004, 10:50 PM