Results 1 to 5 of 5
Thread: J & E Hall Frame 4 compressor
-
26-03-2009, 12:14 AM #1
J & E Hall Frame 4 compressor
Anybody got any griff on a frame 4 as fitted to a McQuay. The frame 4 is an HSA 205 working on 134
-
14-06-2009, 01:33 PM #2
Re: J & E Hall Frame 4 compressor
somebody out there must know summat !!!
-
14-06-2009, 04:17 PM #3
Re: J & E Hall Frame 4 compressor
Non-contact voltage detector HSA 205 with attached insulating cap ...?
-
14-06-2009, 06:05 PM #4
Re: J & E Hall Frame 4 compressor
But indeed your question was (and still remain) probably too specific.
-
18-06-2009, 07:58 AM #5
Re: J & E Hall Frame 4 compressor
Nothing is too specific.
Here go to halltherm spares http://www.halltherm.com/ there is full spares and exploded diagram but they are disposible machines, broken one? get a new one they are cheaper than getting you to re-build it.
Similar Threads
-
LG heat pump problem
By back2space in forum Heat PumpsReplies: 132Last Post: 01-02-2009, 11:23 PM -
seized inv compressor
By flash in forum Air ConditioningReplies: 2Last Post: 09-04-2008, 06:56 PM -
SL/SB-400 Pump Down Procedures
By absolute-zero in forum TransportReplies: 1Last Post: 29-01-2008, 09:27 PM -
Hall V127 compressor
By puddleboy3 in forum Industrial CompressorsReplies: 7Last Post: 25-09-2006, 12:42 PM -
Compressor pumping efficiency
By shogun7 in forum FundamentalsReplies: 0Last Post: 25-02-2004, 10:50 PM