Results 1 to 8 of 8
Thread: Co2 Tank refrigeration system
Threaded View
-
10-03-2009, 09:32 AM #1
Co2 Tank refrigeration system
Hi guys.am new to this industry.and am being give a task of computing the required referigeration load for a Vertical Co2 polyeurethane(6" thik) insulated tank.The problem is when continoulsy running the chiller for 8-9 hrs, the pressure drop is negligeble..ie when the Chiller was switched on, the pressure was 21bar and after continously running for 9 hrs the pressure inside the tank was 20.5 bar..
Should it be considered that the chiller used is inssufficient.Can somebody let me know how do i size the unit or the reasons that may be affecting the system
It would be great if you could give me a few inputs..Following are the tank details:
Tank capacity: 10000T
6"thk polyeurethane insulated vertical tank.
Ref: R404A
Similar Threads
-
Capillary Tube Characteristics
By Chef in forum FundamentalsReplies: 9Last Post: 10-03-2009, 01:03 PM -
Refrigeration system simulation and optimization
By autt in forum System OptimizationReplies: 7Last Post: 05-12-2008, 02:59 PM -
Refrigeration system design
By sachin9782 in forum RefrigerantsReplies: 4Last Post: 19-11-2008, 07:27 PM -
Oil circulation system in Reciprocating refrigeration system
By patilvasudeo in forum FundamentalsReplies: 5Last Post: 17-05-2008, 12:48 PM -
Refrigeration System for Agricultural Produce
By Samarjit Sen in forum FundamentalsReplies: 13Last Post: 03-01-2008, 05:03 AM