Results 1 to 10 of 10
Thread: Bar to Degress C/R
-
09-03-2009, 08:55 PM #1
Bar to Degress C/R
Hey all, can anyone tell me how to convert Bar into Degress C/R
-
09-03-2009, 09:00 PM #2
Re: Bar to Degress C/R
Convert pressure to temperature?????
-
09-03-2009, 09:08 PM #3
Re: Bar to Degress C/R
Yes. On my Unisab control system for my compressor it gives me the pressure in Degrees C/R. I want to convert this to Bar [pressure]
-
09-03-2009, 09:10 PM #4
Re: Bar to Degress C/R
It sounds like you need a comparator
-
09-03-2009, 09:12 PM #5
Re: Bar to Degress C/R
yeah had got that far, do you know of any sites
-
09-03-2009, 09:29 PM #6
-
09-03-2009, 09:34 PM #7
Re: Bar to Degress C/R
Scroll down to the second page - all will be revealed
http://www.coolconcerns.co.uk/Servic...atters%201.pdf
-
09-03-2009, 09:43 PM #8
-
09-03-2009, 10:05 PM #9
Re: Bar to Degrees C/R
Mish
Enter the setup page, Select Suction enter (right facing arrow) select suction pressure.
By lightly touching the set button you can scroll between Bar pressure and degrees C/relative.
Unisab does the calculation for you.
All you have to do is select which option you wish to display
The option you stop on when you exit will be displayed within your main page.
Assuming that Suction is one of the selected options to be displayed?
GrizzlyLast edited by Grizzly; 09-03-2009 at 10:07 PM.
-
10-03-2009, 08:01 PM #10