Frick TDSH 355 l or PDSH 355L

[Peter_1]

Hello,

Someone is asking me for a Frick PDSH 355L but he nor I can't find any information about a PDSH.
Therefore it could be that it is a TDSH.

Does someone know a reliable rebuilder or wholesaler who could hold this machine propably on stock (new or rebuild)?

Thanks

Peter

[Grizzly]

Hello,

Someone is asking me for a Frick PDSH 355L but he nor I can't find any information about a PDSH.
Therefore it could be that it is a TDSH.

Does someone know a reliable rebuilder or wholesaler who could hold this machine propably on stock (new or rebuild)?

Thanks

Peter

Hi peter.
Sorry I can't be more helpful but the following details are listed as the nearest "Frick" dealers.
It would appear that their new masters only list U.K.
And no-one else in Europe.
May be worth a try if none of the other guys respond.
Bit I do know that here are a few on the forum!
Cheers Grizzly

Johnson Controls Limited, York Navy Systems
2-3 Russel Square
Hornsby Way
Basildon, Essex SS TA England, United Kingdom Phone: 44 (0) 1268 246165
Fax: 44 (0) 1268 246158
E-Mail: Steve.T.Hayward@jci.com


The above are listed as Marine.
Frick's are generally Marine in the U.K. at least and land based is generally Sabroe. Not that there is much difference that I know of?
As far as I am aware they are the same just badged differently.
So it may be worth talking to your local Sabroe Guys?
By the way it is TDSH. There is no PDSH.

[josef]

Hi Peter, this question has already been to the Frick TDSH 233 of this forum

[Peter_1]

Grizzly, thanks already for your help
Peter

[The Screwdoctor]

Hello Peter,

PDSH355 does exist, it is a special version of the TDSH model often used in natural gas/propane production on off shore rigs.
Maybe I'm able to help you further on this one.

[koel goeroe]

Hallo,

Peter heeft zo vriendelijk geweest om mijn vraag te lanceren op de forum.
U reageerde dat U misschien kon helpen.
Ik ben op zoek naar zo'n compressor.
Nieuw of remplasse is beiden OK.
Welke gegevens hebt U nog nodig om mij verder te helpen?

[The Screwdoctor]

Hallo Koelgoeroe,

ik zal mijn contact gegevens wel via je mailadres doorsturen.

groet

The Screwdoctor

[koel goeroe]

Hi, Screwdoctor and Peter_1,

Thank you very much to help me out so quick!
It would be wonderful to receive the technical data of this type compressor as now I'm sure they exist.

Koel goeroe