Results 1 to 3 of 3
-
24-02-2009, 09:51 AM #1
Changing from 507 to 22 in a cold store.
Hi members, kindly help in advice on changing a cold store of 1200 metric tons using R502 gas into R22. What can be the effect on temperature and other thing that might affect the efficiency. Thanks.
-
24-02-2009, 08:59 PM #2
Re: Changing from 507 to 22 in a cold store.
in a few months will u be changing the r22 again then
-
24-02-2009, 09:08 PM #3
Re: Changing from 507 to 22 in a cold store.
Dont think Nigeria is banning 22 yet big cheese
The thing to watch is what oil is in the compressor and flushing the system to prevent acid build up.
But it may be worth considering a different refrigerant that is covered by the kyoto agreement maybe 417a ??
But that would mean complete oil change to synthetic and a very good flush and a good triple vac
Similar Threads
-
Fruit cold store design
By Josip in forum Technical SpeculationsReplies: 4Last Post: 12-09-2008, 11:29 AM -
Cold Store Panel
By snow_man in forum Trouble ShootingReplies: 2Last Post: 31-07-2008, 08:05 AM -
Heat load dye to Reach truck in cold store
By smpsmp45 in forum NH3Replies: 15Last Post: 17-06-2008, 11:07 PM -
Expansion Joints in the cold store floor
By smpsmp45 in forum NH3Replies: 2Last Post: 17-05-2008, 07:47 AM -
Low Temperature Cold Store
By iceman007 in forum CommercialReplies: 12Last Post: 16-11-2005, 11:23 PM