Results 1 to 1 of 1
Thread: Help needed!
-
24-02-2009, 11:19 AM #1
Help needed!
Hi, Is there a refrigeration engineer out there who is no older then 30, lives in England and who would be willing to help put together a case study of a refrigeration engineer?
The case study is for "jobs4u", which is a Department for Children, Schools and Families' (DCSF) careers database for young people that can be accessed from the national Connexions website.
Each careers article on the database is accompanied by a case study of someone age 30 or under who is engaged in that work and I have been asked to update the case study of a "Refrigeration Engineer".
What is involved?
1. I would email or post a standard list of questions to the person concerned. They could answer by email or by phone, whichever they preferred.
2. I would send them an email with the draft write up of the case study, so that they could check that they are happy with it. I would also ask for their manager's approval of the case study (not applicable if they are self employed).
3. I would ask permission for the case study to be used for up to two years.
I hope that someone reading this will feel that this is worthwhile and will be able to help.
Many thanks,
RichardEB
Similar Threads
-
Autocascade refrigeration system: design verification needed
By DaBit in forum Technical SpeculationsReplies: 3Last Post: 07-02-2010, 07:48 AM -
Smart/As needed evap defrost?
By dkemper in forum FundamentalsReplies: 6Last Post: 27-10-2008, 07:25 PM -
Help needed
By colinacross@hot in forum New to REReplies: 2Last Post: 07-03-2008, 06:05 PM -
Carrier 40GKX028 service manual needed
By Ireland in forum Air ConditioningReplies: 6Last Post: 08-02-2007, 07:06 PM -
How many small strands needed to equal pipe pressure drop?
By DaBit in forum FundamentalsReplies: 17Last Post: 25-08-2003, 09:56 PM