Results 1 to 2 of 2
Thread: Cold room design and erection
-
19-02-2009, 11:00 AM #1
Cold room design and erection
I am assigned to finish an already started cold room erection(installation). Currently the walls are finished with cement. The ceiling is made from chip wood. We have a complete set of refrigeration machine applicable to such simple box rooms. It just needs a small window through which the machine breathes its cold air. the other thing is we have the Styrofoams which can cover the walls and maybe the ceiling too.
My questions are
1. How do you design cold rooms.
2. How shall I use Styrofoams to keep the room temperature constant.
Thanks a lot.
Tok
-
19-02-2009, 12:58 PM #2