FES Micro III

[duke717]

Hi guys, long time reader here, not much of a poster though. Anyone here have any manuals on the micro III panels. I am starting to run into a few of these. I have literature on the micromaster and the micro II. The company has a manual, but I like to read through things at home sometimes.

Thanks

[US Iceman]

While I do not have any manuals on these there is some information I can share with you. I received a letter from GEA/FES yesterday stating they were going to retire the Micro II & IIE processor boards. Once the surplus stock is gone from inventory you will be limited to repair of the existing board or upgrade to a new control panel.

[josef]

http://www.genemco.com/catalog/pdf/N...compressor.pdf

http://www.genemco.com/catalog/pdf/H...literature.pdf

[duke717]

Thanks Iceman, I figured that would be coming but I had not heard anything about it yet.

[duke717]

Thanks Josef, I saw that info on the website. I am looking for the IOM's.

[roadienh3]

The Micro III manual is generally embedded within a compressor or control panel manual, which have been provided to end users on CD for several years now. Find a client with a CD for a compressor package and it'll have what you're looking for. Good luck!