Results 1 to 6 of 6
Thread: FES Micro III
-
18-02-2009, 01:19 AM #1
FES Micro III
Hi guys, long time reader here, not much of a poster though. Anyone here have any manuals on the micro III panels. I am starting to run into a few of these. I have literature on the micromaster and the micro II. The company has a manual, but I like to read through things at home sometimes.
Thanks
-
18-02-2009, 01:00 PM #2
Re: FES Micro III
While I do not have any manuals on these there is some information I can share with you. I received a letter from GEA/FES yesterday stating they were going to retire the Micro II & IIE processor boards. Once the surplus stock is gone from inventory you will be limited to repair of the existing board or upgrade to a new control panel.
If all else fails, ask for help.
-
18-02-2009, 08:11 PM #3
-
20-02-2009, 10:47 AM #4
Re: FES Micro III
Thanks Iceman, I figured that would be coming but I had not heard anything about it yet.
-
20-02-2009, 10:51 AM #5
Re: FES Micro III
Thanks Josef, I saw that info on the website. I am looking for the IOM's.
-
20-02-2009, 10:19 PM #6
Re: FES Micro III
The Micro III manual is generally embedded within a compressor or control panel manual, which have been provided to end users on CD for several years now. Find a client with a CD for a compressor package and it'll have what you're looking for. Good luck!
Similar Threads
-
Micro Thermo supermarket control
By balzano in forum Supermarket RefrigerationReplies: 2Last Post: 23-01-2009, 04:30 AM -
SUMMIT MICRO ERR.3 (Tech Tip)
By absolute-zero in forum TransportReplies: 2Last Post: 25-01-2008, 08:09 AM -
CTC advance micro featrure and comparison
By absolute-zero in forum TransportReplies: 0Last Post: 06-12-2007, 08:53 PM -
Frick RWB II Plus Rev D Micro
By Vernon in forum NH3Replies: 1Last Post: 04-08-2007, 10:40 AM -
Micro active cooling
By dave12 in forum New TechnologiesReplies: 2Last Post: 24-01-2004, 07:41 PM