Results 1 to 8 of 8
-
17-02-2009, 03:56 PM #1
Stal S26 manuals or advice please
Can anyone advise me how to remove the screws froma stal s26?? I just need to know how to get the thrust bearings out - are they threaded or just pressed in??
Alternativly, can anyone get their hands on a stal S26 workshop manual??
Thanks
-
17-02-2009, 06:54 PM #2
Re: Stal S26 manuals or advice please
riksly
I can help, is it a mk1 or a mk2 machine?
Grizzly
-
17-02-2009, 07:39 PM #3
Re: Stal S26 manuals or advice please
Hi riksly i ve never done s26 but i ve rebuilt s50 ,s60,s70 and they are fairly straight forward apart from opening the axail bearing nuts,the thrust bearings are pushed on , warm the centre of the ball bearing and pushem straight on
-
18-02-2009, 08:05 PM #4
Re: Stal S26 manuals or advice please
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
19-02-2009, 09:27 AM #5
Re: Stal S26 manuals or advice please
Thanks for the reply - it is a mark 2.
Regards
-
19-02-2009, 05:25 PM #6
Re: Stal S26 manuals or advice please
Please take note of what the guys are saying as their points are relevant.
Also having read the manuals I have placed on Mediafire. You may wish to ask for assistance?
See links below.
Grizzly
http://www.mediafire.com/?jx7drmaery4
http://www.mediafire.com/?4nw2ejxetdj
-
19-02-2009, 09:28 PM #7
Re: Stal S26 manuals or advice please
Hi,
unfortunately, as I remember that is not a Stal procedure with this compressor ... without warming bearings must be pushed on the shaft with special tools ...
... take a special care about order of installation ... missing it you must buy a new set of bearings....
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
20-02-2009, 08:44 AM #8
Re: Stal S26 manuals or advice please
Thanks to everyone who has helped.
Similar Threads
-
Compressor Manuals
By GHAZ in forum Industrial CompressorsReplies: 8Last Post: 29-05-2011, 08:29 AM -
Thermo King/Mitsubishi Reefer Manuals, References, etc.
By jingua_ph in forum TransportReplies: 15Last Post: 10-08-2008, 06:02 PM -
Absolute Zero, Daiken manuals
By deu58 in forum TransportReplies: 3Last Post: 19-05-2008, 12:59 AM -
Stal Problems
By NH3LVR in forum Industrial CompressorsReplies: 2Last Post: 16-09-2006, 11:08 AM -
Help Deikin MA90AV1 manuals
By JAGw in forum Air ConditioningReplies: 3Last Post: 27-07-2006, 08:23 PM