Results 1 to 2 of 2
Thread: evoporator/dehumidifier
-
14-02-2009, 01:33 AM #1
evoporator/dehumidifier
Hi all,
I am trying to design inline/staggered evaporator coil (plane fine on tube type) that can be used for both latent and sensible cooling of air. Anyone has a detail guideline-programme for both heat and mass transfer that can be run in EES or coolpack?
Regards
Martin
-
14-02-2009, 09:52 AM #2
Re: evoporator/dehumidifier
Hi
I don't have a software but have successfully designed, installed and commissioned an evaporator/dehumidifier to cool air from 32 Deg. C DB 28 Deg. C WB to 2 Deg. C dew point. This was a plate fin type evaporator and a very deep coil. You can PM me with a more specific query
Regards
SMG