Results 1 to 1 of 1
-
12-02-2009, 06:36 PM #1
Flash tank in Vapor Injection Cycle
Hi,
I am a graduate student in University and I am doing test with a 3 ton heat pump unit using R410A. In my test I will use vapor injection scroll compressor. And I need a flash tank to separate vapor and liquid. The main goal is to design the flash tank so that the system can achieve the best performance. Does anyone have ideas about how to design a flash tank? Such as the diameter and the height?
Thank you
Similar Threads
-
MICROPROCESSOR DIAGNOSTICS/Differnces beteween TK/CTC
By REEFER-TEK in forum TransportReplies: 12Last Post: 27-03-2011, 04:12 AM -
shining fault codes
By al in forum Air ConditioningReplies: 3Last Post: 17-07-2010, 08:34 AM -
Recovery tank
By dddon in forum Chit Chat & Service StoriesReplies: 5Last Post: 01-12-2008, 02:53 AM -
How an expansion tank works?
By Raadster in forum FundamentalsReplies: 6Last Post: 25-07-2008, 02:25 PM -
TK basic micro-p features and functions
By REEFER-TEK in forum TransportReplies: 0Last Post: 05-12-2007, 06:25 PM