Results 1 to 3 of 3

Thread: Connection

  1. #1
    Join Date
    Jan 2009
    Location
    england
    Posts
    15
    Rep Power
    0

    Connection



    To enable checking of pressures and avoid the loss of gass, I was looking to fit either electronic pressure transducer or clycerine filled gauge to the hp and lp service valve connections or at the evaporator - split units. Are the service valve conections 1/4 sae flared.



  2. #2
    Join Date
    Jan 2009
    Location
    england
    Posts
    15
    Rep Power
    0

    Re: Connection

    It is a Copeland Compresser ZF24K4E

  3. #3
    Join Date
    Jun 2008
    Location
    India
    Age
    56
    Posts
    64
    Rep Power
    16

    Re: Connection

    You may look at the manufacturer web site for product information. Here is the llink.
    https://opi.emersonclimate.com/was.e...web/OPIServlet. You will have to register to get access to all product information.

Similar Threads

  1. flow switch connection
    By afeef in forum The Trail of Tears
    Replies: 18
    Last Post: 23-12-2009, 07:55 PM
  2. stop-leak for threaded connection on NH3?
    By Buckiesr in forum Industrial
    Replies: 15
    Last Post: 21-01-2008, 03:38 AM
  3. Fire - run capacitor, high resistance connection?
    By Kenedt in forum Technical Discussions
    Replies: 13
    Last Post: 13-08-2007, 07:07 PM
  4. proper connection of a Water cooled plant
    By The MG Pony in forum Fundamentals
    Replies: 7
    Last Post: 30-05-2007, 10:49 PM
  5. connection cable for spilt unit
    By afeef in forum Electrical
    Replies: 4
    Last Post: 10-04-2007, 05:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •