Results 1 to 6 of 6
Thread: master/slave
-
04-02-2009, 06:14 AM #1
master/slave
Hi memebers
Could anybody lead me that how i must to do communication between two or more grasso screw compressors with simens plc
-
04-02-2009, 08:29 AM #2
Re: master/slave
Hi,
Please visit there web site and try to collect some data
http://www.grasso.nl/en-us/Component...s/default.aspx
-
04-02-2009, 08:39 AM #3
Re: master/slave
thanks for your link but i can't find any things.
-
04-02-2009, 09:05 AM #4
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: master/slave
-
04-02-2009, 07:13 PM #5
Re: master/slave
Hi, chichi
welcome to RE forums...
Maybe to ask this gentleman about your problem...
For more Information
Jeroen Schellekens
Manager Automation Department
Tel.: +49 30 4...
E-mail. Jeroen.Schellekens@GEAgroup.com
---
http://www.grasso.nl/en-us/Component...s/default.aspx
N.B.
Which kind of compressor controller/s you have installed now?
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
05-02-2009, 05:57 AM #6
Re: master/slave
Hi Josip
I work on Grasso screw compressors and grasso screw compressor is controlled by GSC.(Grasso System Control) that is based on the Simatic C7-633 system
Kind Regards
Similar Threads
-
master/slave
By chichi in forum ElectricalReplies: 1Last Post: 15-02-2009, 01:49 PM