Results 1 to 1 of 1
Thread: True Milk Boxes
-
30-01-2009, 01:50 PM #1
True Milk Boxes
I am having Ture milk boxes kill over on me on a regular basis now. The problem I am experiencing is the cap tube is clogging up. I recently began replacing the spun drier with a sporlan capt-32. My reasoning was this drier would do a better job and it seemed to be working but now I have another cap tube stopped up yet again.
Why do these boxes suck so bad???!!!! We have alot of True equipment and I haven't had any trouble out of anything except these stinking R134a milk boxes.
So what would be the best solution? I was considering putting a TXV in but I'm thinking that it may get obstructed as well. My other thought was to convert over to 414B.
I have discussed this with some people and they have expressed that if the condenser gets dirty and the head goes out of sight then you can experience the problems that I have. I made a point to keep the condensers sparkling clean so what am I to think the problem is besides piss poor design?
Similar Threads
-
Replacing glass in door on True refrigerator
By BlueVanACD2005 in forum CommercialReplies: 0Last Post: 19-01-2009, 07:31 PM -
PIR & PU modular boxes
By Chris1977 in forum Supermarket RefrigerationReplies: 1Last Post: 18-08-2008, 05:42 PM -
Milk getting into glycol on chill press
By balerjoe in forum Trouble ShootingReplies: 16Last Post: 06-09-2005, 09:41 PM -
True crap
By angryk in forum Trouble ShootingReplies: 10Last Post: 04-12-2003, 10:09 PM -
Anyone no anything about milk cooling milk tanks, plate coolers, compressors
By neilhuxley in forum CommercialReplies: 2Last Post: 20-09-2002, 08:23 AM