Results 1 to 7 of 7
Thread: star/delta to part wind
-
27-01-2009, 09:47 AM #1
star/delta to part wind
Hi all,
I am hoping someone can help me i have a frescold v1571 which is star/delta and i have been given a replacement which is part wind i have been told that all i need to do is do away with the start contactor and change the timer between the star and delta contactor to less than one sec. Is it really that easy and has anyone done it. Also what delay timer will i need for the 2 contactors.
Hoping someone can help!!
-
27-01-2009, 12:02 PM #2
-
27-01-2009, 01:44 PM #3
Re: star/delta to part wind
If you go to the bitzer web site they got some really good diagrams for converting dtar delta to part wound start
-
27-01-2009, 05:23 PM #4
Re: star/delta to part wind
Good advise there quality.
As you will see SSW I have uploaded it for you!
Well Honiton verses Bridgwater EH!
With me in the middle at Taunton.
I know who Ron is! RESPECT!
A wealth of experience and spot on advise to boot!
SSW.
I don't recognises the Vans but I will keep my eye out for them whilst trawling the lanes!
Grizzly
-
27-01-2009, 05:50 PM #5
Re: star/delta to part wind
Thanks guys for all your help,Much appreciated especially Grizzly and Ron, Thought Lloyds would know,Cheers.
From Richard Terry ACRE Services
-
27-01-2009, 07:06 PM #6
Re: star/delta to part wind
Welcome Richard.
Steve AKA Grizzly
-
27-01-2009, 08:30 PM #7
Similar Threads
-
EN 378 revision
By Argus in forum Legal-Business-MarketingReplies: 19Last Post: 19-11-2008, 07:21 PM -
Part Wind/ Star Delta
By reggie in forum Technical SpeculationsReplies: 34Last Post: 27-08-2008, 05:47 AM -
part p
By eggs in forum ElectricalReplies: 25Last Post: 15-11-2007, 08:55 PM -
convection/adsorption wind tunnel
By duke in forum New TechnologiesReplies: 0Last Post: 09-07-2007, 09:16 PM -
Filter-drier part number question
By Larry2 in forum FundamentalsReplies: 4Last Post: 24-11-2006, 05:46 PM