Results 1 to 3 of 3
Thread: Airedale Chiller
Hybrid View
-
21-01-2009, 02:26 PM #1
Airedale Chiller
Hi all
I have an Airedale USC 500D chiller which is leaking refrigerant from the evaporator end plate, the evaporator manufacturer was Heatcraft France who no longer exist, ive tried Airedale spares but they replied "we dont sell gasket sets" Anyone out there know where i can get spares for this evap?
Cheers
-
22-01-2009, 01:16 AM #2
Re: Airedale Chiller
I just completed making gaskets for a chiller, got the same manufacturers response, can't identify the barrell, don't sell the gaskets, etc.
Use Garlock gasket material, some gasket sealant and make your own. It probably has those crappy rubber gaskets on it that swell up and distort at the sight of refrigerant oil.
-
22-01-2009, 08:22 AM #3
Re: Airedale Chiller
Thanks for that absrbrtek, I'll give it a go
Cheers
Similar Threads
-
process chiller help
By talon771 in forum IndustrialReplies: 8Last Post: 12-01-2011, 08:42 PM -
Dunham Bush Chiller Alarm
By Regulator in forum Air ConditioningReplies: 11Last Post: 08-12-2010, 01:42 AM -
Absorption Chiller VS Mech. Chiller
By Intern in forum IndustrialReplies: 20Last Post: 30-05-2009, 08:31 AM -
Trane CVHE 450 R11 Centrifugal Chiller
By albertjoseph in forum Air ConditioningReplies: 4Last Post: 06-10-2008, 03:23 PM -
Dunham Bush Chiller
By grump in forum FundamentalsReplies: 8Last Post: 18-01-2008, 04:10 PM