Results 51 to 52 of 52
Thread: H/p L/P switch settings
-
23-10-2004, 03:01 PM #51
Re: H/p L/P switch settings
Originally Posted by rdocwra
Gas Type, HP, LP@32F/0C Coil, LP@14F/-10C Coil, LP@-22F/-30C Coil
R-whatever, 99F/38C, 32F/0C, 14F/-10C, -22F/-30CLast edited by Gary; 23-10-2004 at 03:10 PM.
-
13-06-2010, 10:06 PM #52
Re: H/p L/P switch settings
1.you take the max avarage ambient for the region,say 35 deg.
2.take condensor td,say 15k.
3.add 5psi for safety
add 1,2 and 3 =35+15+5=55 degrees. this temp should match the pressure on hp gauge.
That applies to all gasses
Similar Threads
-
flow switch connection
By afeef in forum The Trail of TearsReplies: 18Last Post: 23-12-2009, 06:55 PM -
Supermarket Refrigeration System's Settings
By monsker in forum Supermarket RefrigerationReplies: 8Last Post: 10-04-2006, 02:18 AM -
RCV and HIGH PRESSURE SWITCH
By abbasi in forum FundamentalsReplies: 3Last Post: 22-03-2006, 08:51 AM -
shower switch fault !
By Krups in forum ElectricalReplies: 10Last Post: 19-10-2005, 09:10 PM -
Oil Pressure Switch
By Abe in forum CommercialReplies: 9Last Post: 15-03-2003, 11:18 AM