9000-24000BTU split compressor change?

[karl957]

I would like to hear from any members on this forum on the average time that it would take to replace a compressor in a split or window wall unit. From start to finish and what would be a safe time to quote a customer for the repair?

[rude]

4 hours should be enough, depending on where the unit is located. IF access is hard to get to or you have to work off a ladder id quote more.

[karl957]

Thanks Mr rude for your prompt reply, Please can others also add a reply if you agree or have any input to add.

[nike123]

It depends if compressor has burn-out or mechanical failure. If it is burn-out, then more then one filter change could be required (if you fit burn out filters you need to remove them after cleaning), and you should consider more time for repair.

[glenn1340]

It`s like "how long is a piece of string" depends on access. If it`s on the ground I`d agree with Rude.
One thing to consider though, I`d never carry out that sort of work from a ladder; to many near misses. I`d insist on a tower or I wouldn`t consider it. Also most sites I work on wouldn`t give a work permit for it.
Oh, how many of you got called out over Xmas by the way.

Glenn