Results 1 to 7 of 7
Threaded View
-
07-01-2009, 06:47 PM #1
R22 pipe work & replace technology
Hi all
I have a site with 2 x R22 Fujitsu units to be removed and 2 new cassettes to be installed. The pipe work is run through walls, up risers and over a plastered ceiling so i was thinking of re using the existing pipe work and fitting either a Daikin, Mitsi Electric or Toshiba system which i know has their 'replace technology' to use existing pipe work.
I was wondering if anyone has any tips or recommendations for this install?. The pipe work sizes are the correct size for the new units and as far as i can tell at the survey there has not been any compressor failures.
Many thanks, Gareth
Similar Threads
-
Chilled water pipe work blocked
By puddleboy3 in forum Air ConditioningReplies: 11Last Post: 24-10-2009, 08:22 PM -
Measurement of pipe lengths
By batfink in forum Technical DiscussionsReplies: 11Last Post: 23-09-2008, 09:50 PM -
Mitsubishi Replace Technology
By Daikin=Overated in forum Air ConditioningReplies: 3Last Post: 10-05-2008, 12:21 PM -
new 410 old 22 pipe work
By MRC Guts in forum RefrigerantsReplies: 10Last Post: 10-03-2007, 12:04 AM -
old pipe work
By bernard in forum CommercialReplies: 12Last Post: 27-03-2004, 12:09 PM