Results 1 to 10 of 10

Thread: Nitrogen

  1. #1
    Join Date
    Dec 2008
    Location
    Brazil
    Posts
    106
    Rep Power
    16

    Nitrogen



    In which cases can nitrogen be dangerous ?



  2. #2
    Join Date
    Sep 2007
    Location
    Split Croatia
    Age
    57
    Posts
    6,151
    Blog Entries
    6
    Rep Power
    36

    Re: Nitrogen

    Quote Originally Posted by Acrisoft View Post
    In which cases can nitrogen be dangerous ?
    When it is in liquid state and when it is compressed.

  3. #3
    Join Date
    Oct 2006
    Location
    England
    Posts
    1,843
    Rep Power
    21

    Re: Nitrogen

    Quote Originally Posted by Acrisoft View Post
    In which cases can nitrogen be dangerous ?

    How long is a bit of string?

    You ask a very open ended question!!

    Nitrogen in itself is harmless, we are surrounded by it.
    We breath it in at 80% of the total make up of air.

    It only becomes a problem when you miss use it when it is under pressure. Pressure kills.

    Nitrogen is very safe, but do not leave any in your system after pressure testing because it is a non-condensible.


    taz

    .

  4. #4
    Join Date
    Dec 2008
    Location
    Brazil
    Posts
    106
    Rep Power
    16

    Re: Nitrogen

    Sorry Taz.
    I meant nitrogen in cylinder for refrigeration work purposes.
    I would like to know how safe are the kits sold.
    I write about electronics and refrigeration service and I am very worried about safety.

    Moises

  5. #5
    Join Date
    Jul 2006
    Location
    USA
    Age
    73
    Posts
    865
    Rep Power
    26

    Re: Nitrogen

    It can also be dangerous if it displaces the normal room air.
    For example a Liquid Nitrogen freezing tunnel may require a O2 measuring device in case spillover into the room lowers the available oxygen.

  6. #6
    Join Date
    Sep 2007
    Location
    Split Croatia
    Age
    57
    Posts
    6,151
    Blog Entries
    6
    Rep Power
    36

    Re: Nitrogen

    Quote Originally Posted by Acrisoft View Post
    Sorry Taz.
    I meant nitrogen in cylinder for refrigeration work purposes.
    I would like to know how safe are the kits sold.
    I write about electronics and refrigeration service and I am very worried about safety.

    Moises
    Then check this!
    Last edited by nike123; 01-01-2009 at 01:55 PM.

  7. #7
    Join Date
    Dec 2008
    Location
    Brazil
    Posts
    106
    Rep Power
    16

    Re: Nitrogen

    Thanks for mentioning asphyxiation risk.

    I found an nitrogen accident report, but I can not post links yet because I am a new member:

    archive.org/details/gov.csb.2006.hazards

  8. #8
    Join Date
    Jan 2009
    Location
    Australia
    Age
    61
    Posts
    17
    Rep Power
    0

    Re: Nitrogen

    Quote Originally Posted by Acrisoft View Post
    In which cases can nitrogen be dangerous ?
    Just store it in a safe place and have it secured.

    I was told by someone that if the cylinder falls and the neck snaps it could kill someone.

    I don't know how likely this scenario is, but better be safe than sorry.

    cheers

  9. #9
    Join Date
    Jan 2009
    Location
    Canada
    Posts
    8
    Rep Power
    0

    Re: Nitrogen

    Quote Originally Posted by billv View Post
    Just store it in a safe place and have it secured.

    I was told by someone that if the cylinder falls and the neck snaps it could kill someone.

    I don't know how likely this scenario is, but better be safe than sorry.

    cheers
    As far as I know the standard pressure in a standard
    88 cuft cylinder is @ approximately 2214 PSIG, if the end were broken of from a fall, say off 2 story roof, then there is a good possibility that the nitro cylinder could turn into a rocket and end up being a short lived and very deadly health hazard.

    Personally I never stand up my nitrogen in the field, unless I can tie it up to something sturdy, but I'm lazy so I just lay it down for safety.

  10. #10
    Join Date
    Jan 2009
    Location
    Queensland
    Age
    64
    Posts
    113
    Rep Power
    16

    Re: Nitrogen

    Quote Originally Posted by Enthalpy Eng View Post
    As far as I know the standard pressure in a standard
    88 cuft cylinder is @ approximately 2214 PSIG
    I don't suppose you could be a tad more accurate with your approximation Enthalpy?

Similar Threads

  1. brazing under nitrogen
    By cool#9 in forum Air Conditioning
    Replies: 5
    Last Post: 24-10-2010, 08:30 AM
  2. Nitrogen Condensing by Temperarture
    By Reflexive in forum Technical Discussions
    Replies: 0
    Last Post: 21-12-2008, 12:23 AM
  3. Soldering with/without nitrogen?
    By mooka in forum Domestic
    Replies: 13
    Last Post: 01-10-2007, 12:36 AM
  4. Nitrogen purging?
    By monkey spanners in forum Tools and Calculators
    Replies: 5
    Last Post: 10-06-2007, 09:47 PM
  5. Nitrogen freezer
    By Peter_1 in forum Industrial
    Replies: 11
    Last Post: 05-10-2005, 05:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •