Heat Load Calculation and Sizing of Commercial Refrigerators

[amitsaxena]

Dear All,

I am new to this forum, I need help in calculating the heat load of a commercial refrigerator in transient mode and also the sizing of the components. If anyone can guide i will be highly thankful.

[abet_meneses]

amitxasena;

so many refrigeration load calculations,copeland,bitzer,russell and many more.

regards,

[amitsaxena]

abet,

Can you suggest any free download, which u have tried earlier.

[nike123]

abet,

Can you suggest any free download, which u have tried earlier.

This is good one!

[srini742]

Wish you all happy new year

[amitsaxena]

Dearnike,
I tried the KeepRite Calc, for heat load calculation but i am facing problem while selcting the condensing unit. Can you help me out.
My unit parameter are as below

Heat Load: 1500 BTU/H
Condensing Unit Amb: 95F
Box Temp : 77F
Design TD : 15F
Supply: 200-240V 50Hz
Help me.

[nike123]

Dearnike,
I tried the KeepRite Calc, for heat load calculation but i am facing problem while selcting the condensing unit. Can you help me out.
My unit parameter are as below

Heat Load: 1500 BTU/H
Condensing Unit Amb: 95F
Box Temp : 77F
Design TD : 15F
Supply: 200-240V 50Hz
Help me.

What is your problem? By supplied data, I only could say that you need more data for proper calculation.
That is not enough data for refrigeration engineer to calculate anything usable.