Results 1 to 37 of 37
Thread: Diagnosing valve plate problems
Threaded View
-
29-04-2001, 03:21 PM #1
Perhaps this would be a good thread to summarize the various methods of diagnosing faile suction or discharge valves.
I know there are temperature methods, amperage methods, and pumpdown methods. Let's complicate it a bit and diagnose failed valves on parallel racks. Often, I find it like looking for the leak on a roof. It begins over here, but shows up over there.
Dan
Similar Threads
-
Need a correctly sized valve
By Abe in forum CommercialReplies: 2Last Post: 26-10-2005, 08:42 PM -
Oil return problems
By Peter_1 in forum IndustrialReplies: 37Last Post: 23-08-2004, 11:30 PM -
valve plate failure
By Andy noblet in forum Trouble ShootingReplies: 6Last Post: 04-06-2004, 08:54 PM -
TEV with MOP: how to keep valve body temp above bulb temp?
By DaBit in forum FundamentalsReplies: 5Last Post: 16-10-2002, 12:38 AM -
Valve "Hunting"
By Abe in forum Trouble ShootingReplies: 20Last Post: 21-01-2002, 12:29 AM