Results 1 to 30 of 30
Threaded View
-
17-03-2004, 02:22 PM #1
Cooling down the water in a 1000 liter container
Dear refrigeengineers,
A question.
I'm in lasershow business and when I have outdoor party's I use 1 or 2 1000 liter water containers to cool the lasersystem.
When I use 1 1000 liter container that water is in about 1 till 2 hour 30\40 degrees celsius when I drive the laser with DC 30A secondary current. The laser needs water with a maximum temperature of 30 degrees celsius, and 8.5 liters/min or 2.2 gal/min
Is there a way to cool the water down to about 10 degrees stable? Please keep in mind that the laser must be able to run the whole night.
If it is possible to cool down such containers, maybe it's also possible to look for a smaller solution as the 1 by 1 meter 1000 liter containers, because then I not need such big vehicle to move the containers. The cooling device must cool alot quicker when I use a smaller container instead of a 1000 liter one.
ThanksLast edited by Joep Hogenhout; 17-03-2004 at 04:01 PM.
Similar Threads
-
cooling water TDS
By afeef in forum Technical SpeculationsReplies: 1Last Post: 19-04-2009, 07:38 AM -
pure water from air
By Lc_shi in forum New TechnologiesReplies: 32Last Post: 26-02-2009, 12:25 PM -
Cooling tower evaporation, blowdown, makeup and cycles
By miltbeychok in forum IndustrialReplies: 5Last Post: 14-10-2005, 06:34 PM -
Cooling tower evaporation, blowdown, makeup and cycles
By miltbeychok in forum FundamentalsReplies: 0Last Post: 13-10-2005, 05:14 AM -
Building a wine cabinet
By Rory in forum Technical DiscussionsReplies: 38Last Post: 13-07-2004, 08:28 PM