Results 1 to 6 of 6
Thread: danfoss txv insulation
-
02-12-2008, 07:46 AM #1
danfoss txv insulation
hi everyone.I am looking for a plastic cover(2 pieces) desighed for txv when it's installed outside of a cold room to avoid condesation.can anyone help me find these? thanks
-
02-12-2008, 12:08 PM #2
Re: danfoss txv insulation
What about the black bitumastic and cork insulation that can be moulded by hand.
I think its made by Virginia/KMP....possibly called presstite?
-
02-12-2008, 02:59 PM #3
Re: danfoss txv insulation
i know this tape you are talking about but if you'd seen this plastics you ll understand it's the perfect solution.Also it is easy for the technician to install and uninstall them because they are fasten together with plastic strips.Thank you anyway
-
02-12-2008, 08:06 PM #4
Re: danfoss txv insulation
Get a sheet of that blue building insulation, or polystyrene and cut into two blocks, hollow it out and sandwich the tev in the middle.
-
03-12-2008, 11:23 AM #5
Re: danfoss txv insulation
Hi Lazaros,
Since your from greece, I think it would be possible to find these in Italy. For ex.:
http://www.frizzi.it/index.php?pg=na...t=911&pro=5833
-
03-12-2008, 01:32 PM #6
Re: danfoss txv insulation
thank you very much for the information it was very usefull !
Similar Threads
-
Insulation for Cold Room
By tjk2007 in forum FundamentalsReplies: 25Last Post: 19-03-2010, 02:54 AM -
danfoss txv insulation
By lazaros in forum Trouble ShootingReplies: 1Last Post: 29-11-2008, 01:58 PM -
Help needed sourcing insulation for a Display Case
By jimbo22 in forum Technical SpeculationsReplies: 2Last Post: 03-11-2008, 09:30 AM -
Problems Danfoss Safetyvalve
By Bart Nabbe in forum NH3Replies: 7Last Post: 26-06-2008, 09:05 PM -
Emmisivity as insulation thickness determinant ?
By sharshal in forum Technical SpeculationsReplies: 4Last Post: 23-10-2006, 02:26 AM