Results 1 to 4 of 4
Thread: sub cooling
-
27-11-2008, 09:51 PM #1
sub cooling
people say you can work out if a system is under charged by working out sub cooling at verious points
can someone please run trough it again please its been asked on here so many times but never answerd
cheers nick
-
27-11-2008, 10:33 PM #2
Re: sub cooling
I don't think that you looked hard enough.
Try here...
http://www.refrigeration-engineer.co...ad.php?t=13119Brian - Newton Abbot, Devon, UK
Retired March 2015
-
28-11-2008, 07:55 AM #3
-
28-11-2008, 08:26 PM #4
Similar Threads
-
Some information on the aplication of suction gas/liquid line heat exchangers
By SteinarN in forum FundamentalsReplies: 5Last Post: 14-09-2009, 07:33 AM -
Energy saving Glycol filled dry cooler circuits
By Jasper in forum Technical DiscussionsReplies: 14Last Post: 19-06-2008, 02:18 PM -
Compressor loading, cooling, and range of operation.
By Air duster in forum FundamentalsReplies: 10Last Post: 02-04-2008, 08:39 AM -
Cooling tower evaporation, blowdown, makeup and cycles
By miltbeychok in forum IndustrialReplies: 5Last Post: 14-10-2005, 06:34 PM -
Cooling tower evaporation, blowdown, makeup and cycles
By miltbeychok in forum FundamentalsReplies: 0Last Post: 13-10-2005, 05:14 AM